注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

和申的个人主页

专注于java开发,1985wanggang

 
 
 

日志

 
 

Loading Large Bitmaps Efficiently  

2015-12-10 14:31:41|  分类: 安卓 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |

Images come in all shapes and sizes. In many cases they are larger than required for a typical application user interface (UI). For example, the system Gallery application displays photos taken using your Android devices's camera which are typically much higher resolution than the screen density of your device.

Given that you are working with limited memory, ideally you only want to load a lower resolution version in memory. The lower resolution version should match the size of the UI component that displays it. An image with a higher resolution does not provide any visible benefit, but still takes up precious memory and incurs additional performance overhead due to additional on the fly scaling.

This lesson walks you through decoding large bitmaps without exceeding the per application memory limit by loading a smaller subsampled version in memory.

Read Bitmap Dimensions and Type


The BitmapFactory class provides several decoding methods (decodeByteArray()decodeFile(),decodeResource(), etc.) for creating a Bitmap from various sources. Choose the most appropriate decode method based on your image data source. These methods attempt to allocate memory for the constructed bitmap and therefore can easily result in an OutOfMemory exception. Each type of decode method has additional signatures that let you specify decoding options via the BitmapFactory.Options class. Setting theinJustDecodeBounds property to true while decoding avoids memory allocation, returning null for the bitmap object but setting outWidthoutHeight and outMimeType. This technique allows you to read the dimensions and type of the image data prior to construction (and memory allocation) of the bitmap.

BitmapFactory.Options options = new BitmapFactory.Options();
options
.inJustDecodeBounds = true;
BitmapFactory.decodeResource(getResources(), R.id.myimage, options);
int imageHeight = options.outHeight;
int imageWidth = options.outWidth;
String imageType = options.outMimeType;

To avoid java.lang.OutOfMemory exceptions, check the dimensions of a bitmap before decoding it, unless you absolutely trust the source to provide you with predictably sized image data that comfortably fits within the available memory.

Load a Scaled Down Version into Memory


Now that the image dimensions are known, they can be used to decide if the full image should be loaded into memory or if a subsampled version should be loaded instead. Here are some factors to consider:

  • Estimated memory usage of loading the full image in memory.
  • Amount of memory you are willing to commit to loading this image given any other memory requirements of your application.
  • Dimensions of the target ImageView or UI component that the image is to be loaded into.
  • Screen size and density of the current device.

For example, it’s not worth loading a 1024x768 pixel image into memory if it will eventually be displayed in a 128x96 pixel thumbnail in an ImageView.

To tell the decoder to subsample the image, loading a smaller version into memory, set inSampleSize to truein your BitmapFactory.Options object. For example, an image with resolution 2048x1536 that is decoded with an inSampleSize of 4 produces a bitmap of approximately 512x384. Loading this into memory uses 0.75MB rather than 12MB for the full image (assuming a bitmap configuration of ARGB_8888). Here’s a method to calculate a sample size value that is a power of two based on a target width and height:

public static int calculateInSampleSize(
           
BitmapFactory.Options options, int reqWidth, int reqHeight) {
   
// Raw height and width of image
   
final int height = options.outHeight;
   
final int width = options.outWidth;
   
int inSampleSize = 1;

   
if (height > reqHeight || width > reqWidth) {

       
final int halfHeight = height / 2;
       
final int halfWidth = width / 2;

       
// Calculate the largest inSampleSize value that is a power of 2 and keeps both
       
// height and width larger than the requested height and width.
       
while ((halfHeight / inSampleSize) > reqHeight
               
&& (halfWidth / inSampleSize) > reqWidth) {
            inSampleSize
*= 2;
       
}
   
}

   
return inSampleSize;
}

Note: A power of two value is calculated because the decoder uses a final value by rounding down to the nearest power of two, as per the inSampleSize documentation.

To use this method, first decode with inJustDecodeBounds set to true, pass the options through and then decode again using the new inSampleSize value and inJustDecodeBounds set to false:

public static Bitmap decodeSampledBitmapFromResource(Resources res, int resId,
       
int reqWidth, int reqHeight) {

   
// First decode with inJustDecodeBounds=true to check dimensions
   
final BitmapFactory.Options options = new BitmapFactory.Options();
    options
.inJustDecodeBounds = true;
   
BitmapFactory.decodeResource(res, resId, options);

   
// Calculate inSampleSize
    options
.inSampleSize = calculateInSampleSize(options, reqWidth, reqHeight);

   
// Decode bitmap with inSampleSize set
    options
.inJustDecodeBounds = false;
   
return BitmapFactory.decodeResource(res, resId, options);
}

This method makes it easy to load a bitmap of arbitrarily large size into an ImageView that displays a 100x100 pixel thumbnail, as shown in the following example code:

mImageView.setImageBitmap(
    decodeSampledBitmapFromResource
(getResources(), R.id.myimage, 100, 100));

You can follow a similar process to decode bitmaps from other sources, by substituting the appropriateBitmapFactory.decode* method as needed.


https://developer.android.com/intl/zh-cn/training/displaying-bitmaps/load-bitmap.html

  评论这张
 
阅读(236)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2016